top of page

Prayer Group

Public·18 members

Wifi Thomson Default Key Generator

I'm very glad you brought this up. All the wifi hubs in my area are BThomehub 4 or 5. Almost everyone uses the default 10 character hexadecimal key. This is written on the based of the modem. I figured cracking 12^10 by brute force was nearly impossible and the only option would be to physically sneak a glance under the modem to read the key. A shortcut would be a life saver.

wifi thomson default key generator

The other interesting feature with Wifi Password Router Keygen is to simply create the alphanumeric wifi passwords with the keygen , select wpa or wps network from different bits so to generate your anonymous pass. The app will never hack wifi passwords of others, it just get the default keys of your own router, so If you have just kept your default key you can instantaneous get your key back.You can use Wifi Password Router Keygen as well to increase your security of your router and modem against aircrack , reaver , kali linux or backtrack attacks. Generate a 20 length alphanumeric password and be pretty sure that no one can how to hack wifi that you own. The app supports a lot of routers, so download it and generate any random key to protect your router and to increase security.The app works perfectly dor example with networks that begins with YaCom_6X, WLAN_XXXX, MAXCOMXXXX , JAZZTEL_XXXX, INFINITUMXXXX , WLAN_6X , Megared-XXXX, InterCableXXXX , AXTEL-XXXX, InterCable6X, INFINITUM6X. To make it clear, here is the full list of the other routers that are compatible with the app, and for whom the Wifi Password Router Keygen can generate default WPA/WEP:

Decompressing Bootloader..............................Gateway initialization sequence started.Version BL: 1.0.5Multicore disable; Booting Linux kernelBOOTING THE LINUX KERNELStarting the kernel @ 0x801ddde0Extra parameters passed to Linux: [0]: bootloader [1]: memsize=0x3EDD000Linux version 2.6.30 (gcc version 3.4.6) #1 Wed Jul 20 16:54:36 CST 2011BCM63XX prom initCPU revision is: 0002a075 (Broadcom4350)Determined physical RAM map: memory: 03edb000 @ 00002000 (usable)Wasting 64 bytes for tracking 2 unused pagesZone PFN ranges: DMA 0x00000002 -> 0x00001000 Normal 0x00001000 -> 0x00003eddMovable zone start PFN for each nodeearly_node_map[1] active PFN ranges 0: 0x00000002 -> 0x00003eddOn node 0 totalpages: 16091free_area_init_node: node 0, pgdat 80234390, node_mem_map 81000040 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4062 pages, LIFO batch:0 Normal zone: 94 pages used for memmap Normal zone: 11903 pages, LIFO batch:1Built 1 zonelists in Zone order, mobility grouping on. Total pages: 15965Kernel command line: root=31:0 ro noinitrd memsize=0x3EDD000 console=ttyS0,115200 root=/dev/mtdblock2 rootfstype=squashfswait instruction: enabledPrimary instruction cache 32kB, VIPT, 4-way, linesize 16 bytes.Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytesNR_IRQS:128PID hash table entries: 256 (order: 8, 1024 bytes)console [ttyS0] enabledDentry cache hash table entries: 8192 (order: 3, 32768 bytes)Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)Memory: 61168k/64364k available (1874k kernel code, 3176k reserved, 323k data, 108k init, 0k highmem)Calibrating delay loop... 318.46 BogoMIPS (lpj=159232)Mount-cache hash table entries: 512--Kernel Config-- SMP=0 PREEMPT=0 DEBUG_SPINLOCK=0 DEBUG_MUTEXES=0net_namespace: 584 bytesNET: Registered protocol family 16registering PCI controller with io_map_base unsetregistering PCI controller with io_map_base unsetbio: create slab at 0usbcore: registered new interface driver usbfsusbcore: registered new interface driver hubusbcore: registered new device driver usbpci 0000:00:09.0: reg 10 32bit mmio: [0x10002600-0x100026ff]pci 0000:00:0a.0: reg 10 32bit mmio: [0x10002500-0x100025ff]pci 0000:01:00.0: PME# supported from D0 D3hotpci 0000:01:00.0: PME# disabledpci 0000:02:00.0: reg 10 64bit mmio: [0x000000-0x003fff]pci 0000:02:00.0: supports D1 D2pci 0000:01:00.0: PCI bridge, secondary bus 0000:02pci 0000:01:00.0: IO window: disabledpci 0000:01:00.0: MEM window: 0x10f00000-0x10ffffffpci 0000:01:00.0: PREFETCH window: disabledPCI: Enabling device 0000:01:00.0 (0000 -> 0002)PCI: Setting latency timer of device 0000:01:00.0 to 64BLOG Rule v1.0 InitializedBroadcom IQoS v0.1 Jul 20 2011 16:52:32 initializedNET: Registered protocol family 2IP route cache hash table entries: 1024 (order: 0, 4096 bytes)TCP established hash table entries: 2048 (order: 2, 16384 bytes)TCP bind hash table entries: 2048 (order: 1, 8192 bytes)TCP: Hash tables configured (established 2048 bind 2048)TCP reno registeredNET: Registered protocol family 1squashfs: version 4.0 (2009/01/31) Phillip Loughersquashfs: version 4.0 with LZMA457 ported by BRCMJFFS2 version 2.2. (NAND) 2001-2006 Red Hat, Inc.msgmni has been set to 119io scheduler noop registered (default)Gateway flash mappingflash mapping initializedCreating 4 MTD partitions on "thomson-spi":0x000000040000-0x0000000b0000 : "userfs"0x000000020000-0x000000040000 : "mtdss"0x000000180000-0x000000800000 : "rootfs"0x0000000b0000-0x000000180000 : "kernel"brcmboard: brcm_board_init entrySerial: BCM63XX driver $Revision: 3.00 $ttyS0 at MMIO 0xb0000100 (irq = 36) is a BCM63XXttyS1 at MMIO 0xb0000100 (irq = 36) is a BCM63XXttyS2 at MMIO 0xb0000120 (irq = 47) is a BCM63XXTCP cubic registeredNET: Registered protocol family 17NET: Registered protocol family 15VFS: Mounted root (squashfs filesystem) readonly on device 31:2.Freeing unused kernel memory: 108k freedinit started: BusyBox v1.00 (2011.07.20-08:57+0000) multi-call binaryinit started: BusyBox v1.00 (2011.07.20-08:57+0000) multi-call binaryStarting pid 111, console /dev/ttyS0: '/etc/init.d/rcS'Initializing random number generatorMounting encrypted partitions ...insmod: loop.ko: no module by that name foundWarning: assuming 'archivefs' is on mtdblock3/etc/init.d/cryptomount: 25: /usr/sbin/fssetup: not foundmount: Mounting /dev/loop0 on /archive failed: No such device or addressUsing /lib/modules/kserport.kokserport: module license 'unspecified' taints kernel.Disabling lock debugging due to kernel taintUsing /nmon/nmon.koloading geniodb kernel modules...Using /lib/modules/geniodb.ko geniodb driver: Loading ... geniodb driver: Loading finished with SUCCESSButton char device has been created and initialized.[BCM ADSL] BcmAdsl_SetOverlayMode = 85 new=0tmm_skb_desc.queuesize = 300queue: 0xc09a3708queue: 0xc09a3708, rp: 0xc09a3708, wp: 0xc09a3708[BCM ADSL] ------ dslFileLoadImage : OverlayMode = 0 fname=ZXD3AApci 0000:00:09.0: firmware: requesting ZXD3AApSdramPHY=0xA3FFFFF8, 0x46F57 0xDEBDBEEF[BCM ADSL] Firmware load : 547100 547100 LMEM=(0xB0D80000, 41280) SDRAM=(0xA3F00000, 505812)pci 0000:00:09.0: firmware: requesting phy*** PhySdramSize got adjusted: 0x7B7D4 => 0x91368 ***AdslCoreSharedMemInit: shareMemAvailable=453744BcmOs_vmalloc : wrong size = 18608AdslCoreHwReset: Failed to calloc for pLocSbStaAdslCoreHwReset: pLocSbSta=0 bkupThreshold=1600AdslCoreHwReset: AdslOemDataAddr = 0xA3F71E48ADSL PHY version is A2pDT001g.d23gb6w_initFOUND WL DEVICE 0, bus=2, device=0, func=0, vendorid=14E4, deviceid=A8DC, regaddr=10F00000, irq=31wl:srom not detected, using main memory mapped srom info(wombo board)veth0 (): not using net_device_ops yetNET: Registered protocol family 3NET: Registered protocol family 9NET: Registered protocol family 6NET: Registered protocol family 4NET: Registered protocol family 5NET: Registered protocol family 18NET: Registered protocol family 25insmod: rawstorage.ko: no module by that name foundDevice ipsec not present.voice will be loadedmodprobe: module l2cap not found.modprobe: failed to load module l2capinsmod: rawstorage.ko: no module by that name foundDevice endpoint not present.Device ikanos not present.Starting pid 350, console /dev/ttyS0: '/etc/init.d/rc'Switching to RUNLEVEL 1 ...Disabling hotplug helperroute: SIOC[ADDDEL]RT: File existslinux application start ...wait for linux_appl to initialize (1)wait for linux_appl to initialize (2)************* ERROR RECORD *************000000:00:00.000000Application NMON started after POWERON.****************** END *****************appl_init: BUILD VERIFIED!wait for linux_appl to initialize (3)wait for linux_appl to initialize (4)[SS EMUL] ERR: opening config file /active/ss.conf failedEnd of initialisation start fseventd ... fseventd is started. start storagepl ... storagepl is started start vfspl ... vfspl is startedMVFS plugin startedcifs plug-in: initializing ... cifs plug-in is startedupnpavpl start .../usr/bin/fusermountLoading fuse modulefuse init (API version 7.11).Mounting fuse control filesystem.linuxappl: start loading after [ 3924ms ]WARNING: Unknown Parameter Type ifmfilterWARNING: Unknown Parameter Type ifmfilterS67stopload: wait until configuration load reaches phase 9...S67stopload: wait until configuration load reaches phase 9 (now -1, 1s)WARNING: Unknown Parameter Type brgroupWARNING: Unknown Parameter Type brgroupadsl: adsl_open entryADSL Line state is: DOWN[adsl] trace = 5 0S67stopload: wait until configuration load reaches phase 9 (now -1, 2s)The OBC bridge interface cannot be removed from this VLAN, because OBC is defined as untagged.S67stopload: wait until configuration load reaches phase 9 (now 3, 3s)S67stopload: wait until configuration load reaches phase 9 (now 3, 4s)S67stopload: wait until configuration load reaches phase 9 (now 3, 5s)S67stopload: wait until configuration load reaches phase 9 (now 3, 6s)S67stopload: wait until configuration load reaches phase 9 (now 3, 7s)DyingGasp RIP BIT is set![ERROR : [DIAG 1004] -1 ]ADSL configuration: adslmultimode = adsl2plus syslog = disabledThe OBC bridge interface cannot be removed from this VLAN, because OBC is defined as untagged.S67stopload: wait until configuration load reaches phase 9 (now 3, 8s)Failed to add host 58:98:35:9b:dd:bcstopping the pureftp-server ...S67stopload: wait until configuration load reaches phase 9 (now 3, 9s)the pureftp-server is stoppedstopping the pure-authd ...the pure-authd is stopped63xx USB Host Clock disableS67stopload: wait until configuration load reaches phase 9 (now 6, 10s)S67stopload: wait until configuration load reaches phase 9 (now 6, 11s)S67stopload: wait until configuration load reaches phase 9 (now 6, 12s)S67stopload: wait until configuration load reaches phase 9 (now 6, 13s)S67stopload: wait until configuration load reaches phase 9 (now 6, 14s)S67stopload: configuration load reached phase 9...Intel MicroStack 1.0 - Digital Media Server (DLNA 1.5)(pid = 829),loc_generate_uuid:3a56141b-123b-59e2-9daf-c006d02343a6nlplugd start ...Initializing.Starting netlink pluginDaemonize netlink pluginudhcpcd start ...monitoripd start ...anti_spoofd start ...anti_spoofd : process exit ! start mud ...Starting power manager...Username :


This group is for intercessors. Those with a heart for God a...
Group Page: Groups_SingleGroup
bottom of page