Buy Xlr Cable Bulk
Make sure your voice reaches the cheap seats in the back with Microphone Cables from Seismic Audio Speakers. Our quality Microphone Cables are available with cord lengths of up to 300 feet, so you can perform at even the largest venues without worry. Microphone Cables from Seismic... Microphone CablesMake sure your voice reaches the cheap seats in the back with Microphone Cables from Seismic Audio Speakers. Our quality Microphone Cables are available with cord lengths of up to 300 feet, so you can perform at even the largest venues without worry. Microphone Cables from Seismic Audio Speakers each feature XLR Male to XLR Female connectors. Choose Microphone cables in a great selection of bold colors that will stand out and prevent tripping and accidents on the stage. Each Microphone Cable also features a durable, heavy duty rubber cable coating for added safety.
buy xlr cable bulk
So you want to make your own mic cables, guitar cables, etc..etc.. Well, the first thing you'll need is qualityBulk Audio Cable . The best Bulk Audio Cable for this application is a good Star Quad cable which is designed for use with microphones but is also excellent for all line-level signals (e.g. mixer to power amps). The 4-conductor Star Quad arrangement cancels electromagnetically induced noise from SCR dimmer packs, fluorescent lighting ballasts and AC power transformers. Handling noise is prevented by use of cotton filler material and also offers excellent frequency response. When you're ready Markertek has plenty of Bulk Audio Cable waiting for you.
If you are running microphone or any balanced line cable (like headphones or monitor returns) in walls, under floors, or through ceilings, this is the cable you need. Two conductor, 22 gauge, 100% aluminum polyester tape shield with drain. Available by the foot (per 100') or in convenient 1000' pull boxes.
Whether you're recording or performing on stage, a mix of quality and durability is exactly what you'll need. Complement your microphones with the Silverback XLR cable. The Silverback screamer XLR Cable features pure copper conductors, and a rugged, yet flexible build;
Cannon Sound And Light stocks a large range of quality pre assembled microphone, multicore, signal, speaker and guitar cables as well as a range of bulk cable. Brands include Canare, EWI, Klotz and Proel.
Make your own custom length XLR cables using this 3-Pin XLR Female Connector from Monoprice! This 3-pin female connector features a nickel-tin body, gold plated pins for smooth, corrosion-free connections, and a rubber strain relief boo... ...
Build your own custom balanced mono and unbalanced stereo patch cables using this Professional Microphone Bulk Cable from Monoprice!This cable features two 21AWG high-purity, oxygen-free copper conductors, a braided copper shield with 97.5% cover... ...
Make your own custom length XLR cables using this 3-Pin XLR Male Connector from Monoprice!This 3-pin male connector features a nickel-tin body, gold plated pins for smooth, corrosion-free connections, and a rubber strain relief boot. Use this wit... ...
Special Order or Custom Order items, as indicated on the webpage in the Special Notice section for those applicable products may have different return terms and conditions. See the Special Orders, and Custom Orders section below for more information.
The VH Audio cryo-treated OFC (Oxygen Free Copper) hookup cable with AirLok insulation is designed to be used for INTERNAL chassis hookup wire (signal or power), speaker cable (in-wall, xover, external or inside speaker cabinet), or for DC umbilicals. *** This wire is NOT designed to be used as external AC MAINS power cable, because the soft AirLok insulation is not designed to withstand the strain relief clamping pressure on most AC connectors. Insulation is rated for use up to 300VAC (power limited).
** This wire is NOT designed to be used as external AC MAINS power cable, because the soft AirLok insulation is not designed to withstand the strain relief clamping pressure on most AC connectors. Insulation is rated for use up to 300VAC (power limited).
2) VH Audio is very pleased to announce the Pulsar Ag. The Pulsar Ag is the culmination of nearly 6 years worth of R&D effort to make a 75 ohm SPDIF digital cable that would set a new bar for digital performance. As a result, the Pulsar Ag is VH Audio's Statement design for true 75 ohm digital SPDIF applications, and its use for shielded analog interconnects is so profoundly good- it will compete favorably with ANY shielded interconnect on the market, regardless of price.
NEW ITEMS! The VH Audio Symmetry Cu balanced analog (XLR) or digital (AES/EBU) interconnect cable is a minimalist twisted pair design that uses a single 24 AWG solid pure copper wire (Deep Cryogenically treated) for the signal conductors. These 24 AWG copper conductors are insulated with solid FEP insualtion, in order to maintain precise spacing and prevent deformation of insulation when the cable is bent. This means the ideal 110 ohm impedance will stay consistent, even for longer runs and awkward or tight bends. Natural unbleached cotton, PTFE tape and a proprietary ultra-flexible core material are used to buffer mechanical resonances, as well as provide flexibility. The inner core of the cable has been designed to space away the interconnect's shield/ground (foil and silver plated copper) from the critical signal carrying conductors. The Symmetry Cu interconnect is recommended for any analog balanced (XLR) or or digital (AES/EBU) application. HIGHLY RECOMMENDED with Furutech FP-601M and FP-602F connectors (We like gold for analog and rhodium for digital). Just add some 3/8" techflex for a professional look. Cable O.D. is .36"
Star Quad (12 AWG X 4) is what VH Audio uses for it's Flavor 4 Power cable, and is also excellent when used as a speaker cable. It consists of FOUR 12 AWG FEP insulated copper conductors, tightly twisted into a Star Quad geometry, creating a low inductance/high capacitance configuration prone to reject RFI/EMI. Each of the four 12 AWG conductors is made with 19 strands of 25 AWG bare copper, which means excellent contact area when secured to AC plugs. Lastly, a clear FEP jacket encapsulates the four conductor bundle to keep relative movement of the conductors to a minimum. The Star Quad geometry concentrates the electrical field towards the CENTER of the conductor bundle, making this a self-shielding cable. Deep Cryogenic treatment. Cable is custom made to VH Audio's specifications, and is ONLY available at VH Audio.
Single Ground wire (12 AWG and 10 AWG)is what VH Audio uses for the safety ground wire in all its power cables, except for the AirSine. The 12 AWG version consists of 19 strands of FEP insulated 25 AWG copper, while the 10 AWG version consists of 19 strands of FEP insulated 23 AWG copper.
Synthetic Rubber Hose (3/8" I.D. X 5/8" O.D.) is recommended for DIY Flavor 2 Power Cords, and is also used for VH Audio's Flavor 4 power cable. It has been chosen for its flexibility, vibration dampening ability, and its ability to be torqued easily compared to other hose with these dimensions. Color is BLACK.
Furutech FP-TCS21 (14 AWG) and FP-TCS31 (12 AWG) PC-Triple C are new cables developed by Furutech's engineers, using Furukawa high-purity oxygen-free copper as well as a unique, new forging process. Unlike typical OFC (oxygen-free copper), nearly all the impurities have been removed through a special casting process unique to Furukawa. Designed specifically for audio signal conductors, Furutech's (Alpha) PC-Triple C is flexible, strong and can be optimally drawn into very fine wire.
Furutech's limited release of the 10 AWG version (FP-S55N) has been acclaimed by some audiophiles as one of the best power cables ever made, regardless of cost... This cable had been discontinued, but due to popular demand, annother run was made, and VH Audio has a limited quantity available. Now IN-STYOCK
Specifications: Conductor Material Alpha-OCC + DUCC (7N Class). Insulation Inner Material Audio Grade FEP (Fluoropolymer) Outer Material Audio Grade P.E. Nano / Ceramic / Carbon particle compound. Overall Diameter 17.0 mm. Flexibility is excellent, and much better than typical for a cable of this diameter.
Neotech has been producing outstanding cables since 1980, and has long been a leader in producing wire and cable using "single crystal" UP-OCC Copper, developed by Professor Ohno of the Chiba Institute of Technology in Japan. UP-OCC copper is at least 99.99998% pure, and has an average crystal size of 125 meters (410 feet)! Compare this to the average crystal size of Oxygen Free Copper, which is .02 meters (3/4"). UP-OCC copper and silver are considered the ultimate in copper and silver conductior technology today.
The Neotech NEP-3200 is a 9AWG UP-OCC (ohno continuous cast) Copper AC power cable, that uses 16 solid copper wires that are each 17 AWG. Each of these solid core wires is individually insulated with FEP (fluoropolymer) insulation. Each wire is woven around a fiber-filled PVC core to maintain structural integrity, and minimize conductor movement. The Neotech NEP-3200 is among the best bulk cables on the market, and is especially ideal for high current amplifiers, as well as feeding power strips or line conditioners. Use the 6 red color-coded conductors for 'hot', 6 blue conductors for 'neutral', and 4 black conductors for the 'safety ground'. Total O.D. is .614" (15.6mm).
Oyaide Electric, with the experience gained from a long history of cable design, has developed a reference quality power cable called the Tunami. The cable is constructed using PCOCC-A wire using advanced heat control and extrusion technology. The Tunami utilizes a 5.5 sq. mm conductor core that is rated up to 30 amps and can take up to 600 volts A/C. In addition, it has a unique 3 layer shielding system to not only to shut out external noise but also to suppress internal noise, resulting in a very low noise floor. 041b061a72